Rear Hub/bearing Assembly - Corolland: the Toyota Corolla Forums

My car pulls to the left. Rear right has a -0.05 (tow out) .

Rear left is well within specs. At +0.20. (Tow in).

I want to install a 0.25 shim at the rear right facing the rear to match the left positive tow. -.05(+) +.25=0.20

Since I'm removing the old rusty rear hub, I thought I'd buy two new ones.

Accidentally purchased with ABS. My 05 le is non ABS. Looks like the only difference is the sensor connection on the back. I'm hoping that won't be an issue. I might fill the plug with silicone. Amazon has them for 63 dollars each. The non abs ones are actually 20 bucks more each.

It's not a problem at all. You can cut any ABS plug wire clean off... You might be surprised by how solidly rusted on they are. You have a sledgehammer?

That makes me feel better about my purchase. Thanks! .

I have a heavy short handle hammer.

I've been spraying the area with penatrating oil for a few days. I might try bolting the wheel on and kicking it.

Have you done this on your 04? Do you know if I have to remove the brake shoes?

Also I'm not sure if the hub assembly comes with new bolts.