Corollas2019-23ToyotasTech

Search Corolland!

Guest SoCal_CJ

Side Mounted- Turn Signal Repeaters




Guest SoCal_CJ

Guest SoCal_CJ

Side Mounted- Turn Signal Repeaters,

side markers are the non blinking, visible from the side,

yellow in the front and red in the rear (no pun intended)

what I want is the clear, highly mounted on the fender, towards the door, clear lens whth a yellow bulb Side Mounted- Turn Signal Repeaters

cool?

I put side marker lights on my Toyota Truck, they are small rectangles about 3 inches long and 1/2 inch wide, they have a round rubber gromited insert, so installation was a center hole and two small end holes for the mounting screws, they look almost stock and do give fair warning when changing freeway lanes, I live in So Cal ya know....

But just like alarms keeping honest folks honest etc, it only keeps the folks paying attention at bay and alert...

The jerks still almost change into me with out signaling and such,

Even though it has save me a accident or two or at least a close call or two,

The Alteeza has small oval ones, clear with yellow bulbs, about 2 1/2 x 1 inch,

I can get them for $50 and like the safety factor for my wife and child...

So they would be kinda stock and still Toyota, please send opinions and please no dumb flames etc. thanks!

and thanks for the info from Zero, I foud these at Carson Toyota, cool place thanks!

Here is more info…

http://www.katch.ne.jp/~moreno03/gita/smarker/smarker.html

This guy did his with a BMW but has not answered emails sent;

http://www.cardomain.com/memberpage/242344/1

One easier way is to find one that has a center post mount, so all I will have to do is cut a circle, someone told me a 323, 318 or M3 one would work, any ideas?

The 2003 Alteeza ( the car not the aftermarket lights) the Japanese version of the Lexus IS300 which is in essence based on the Corolla has them, see attached, they are small ovals with a square back so I would have to cut a square hole, this would be OK, as the body of the lens would cover any imperfections. See here the JDM ALteeza ones pictured on www.is300.net

http://www.is300.net/store/customer/produc...0&cat=13&page=1 for side marker

And

http://www.is300.net/store/customer/product.php?productid=17 for bumper, not doing this but would this work?

The Scion also built by Toyota has a rounded tear drop shaped one, kinda like an egg shape, although not recessed. .it does need a same shaped hole to clip mount into, again the need for a same shaped hole requiring skill possibly beyond mine.

seen the Audi / VW ones they are cool, clear with a silver reflector over the bulb

Posted over here too, any suggestions???



Topic List