ForumsCorollas2019-21ToyotasTech

Opium

Members
  • Content Count

    47
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Opium

  • Rank
    Well-known member
  1. I found the issue, cable was a tad bit chewed. I'm trying to find out the part number/name of the cable so I can replace it.
  2. The a/c compressor is about a year ago. Its a Delphi one. I'm thinking its the clutch coil. I haven't added any thing new, no new audio system.
  3. I changed the fuse with the exact same 7.5 amps. When I turn on the a/c cold, the a/c button stays lit for a second and it sounds like the compressor comes on but then the a/c light turns off, the compressor off and the air doesnt come out cold, the new fuse blown. What are the possible causes, to this?
  4. I give up. Like you said, its pretty hard to pin point the malfunctioning part. I LL just leave how it is.
  5. I installed the driver side control arm but still the sam issue. I guess it might be on the passenger front side.
  6. I just bought the driver side and I'm doing it myself. Hopefully when I put it on, the issue would be fixed.
  7. I just bought the moog RK80336, entire control arm for $37 instead of the Roca bushings + shipping = $38
  8. Every time I break hard, making the tires skid, I can hear and fell a jerk from the left front side. As if something rocks forward around the wheel. Also, when I slow down from anything above 50 mph, when pressing the brakes, theres major vibration. My tires are good, balance and aligned. My rotors and brake pads are good. Can this be a sign of a control arm bushing or motor mount?
  9. I need to replace the control arm bushings on my 99 prizm. Which is a good brand? Roca?
  10. What are decent aftermarket Headlights and side markers for a 99 prizm? Not to pricey. Any one with these? 1A Auto http://www.1aauto.com/1998-02-chevy-prizm-headlight-pair/i/1alhp00307?f=515303&y=1999 Or some from ebay?
  11. I bought them without center caps but I have extended studs and lug nuts. They won't fit under the center cap. I guess I'm going to cut the studs.
  12. I have the Mazda Daisy rims with a center bore of 54.1mm and I'm looking for a rubber cap or something to only cover the cv joint bore.
  13. I'm an idiot, it was the bearing on the front passenger side
  14. Its in on the front, driver side. I jacked up the car and spun the tire, didn't hear anything bad. When I turn the tire, I don't hear it.
  15. I changed the wheel bearing and I had a new cv joint installed about 2 months ago. I still hear a grumbling sound. As I increase speed, the noise gets louder. What could it be?